Clean the air filter using a clean brush, or wash it in soap and water; To service pleated paper filter: Alternatively, ensure the spark plug has been pulled first, and then make sure it has cooled down.
Sputtering And Loss Of Power.
It is important to note that excess oil might turn out to be harmful to the exhaust. Once rinsed, be sure to dry. Clean the air filter's fitting before reinserting an air filter, clean the air filter's housing with a dry cloth.
Replace The Cover Over The.
Once this is complete, disconnect the spark plug wire and remove the air filter cover. And do not use compressed air, which could force debris down the throat of the lawn mower's carburetor. If there is a lot of dirt, wash the filter with a soft brush in warm soapy water and rinse until the water runs clear.
Gently Remove The Air Filter From Its Housing And Use Liquid Soap And Hot Water To Remove Any Excess Grease.
Repeat the process if there is any debris remaining. Determine if you need a new air filter or if your current one is adequate. Won't start up at all.
Keep A Clean Airflow Within Your Landscaping Tool With Our Husqvarna Air Filters.
If your mower has a hose fitting, turn the hose on, and then start the mower and let it run, allowing the water supply to clean the underside. When cleaning the air filter, start by turning off the engine and making sure all moving parts within the lawnmower have stopped. If your air filter is made of foam you will need to carry out the following steps.
Allow The Air Filter To Dry Completely, And Then Reassemble The Air Filter To.
Attach the air filter with the paper cartridge. Squeeze the foam filter dry in a clean cloth. Clean the air filter compartment by using a cleaning brush before installing the air filter into its previous position.
